With the increasing requirements for construction efficiency, traditional bucket excavators have long been unable to meet the requirements of diverse working conditions! If your excavator can become a real-life Transformer and be competent for multiple tasks by simply changing a set of accessories, then you will definitely make a lot of money with one car!
There are many auxiliary working devices at the front end of the excavator, and according to incomplete statistics, there are about 40 to 50 types. Today, Juxiang Machinery will introduce you to 10 common front-end accessories for excavators. Have you used all these accessories?
01
Hydraulic Breaker
As an auxiliary device of the excavator, the popularity and importance of the breaker are beyond doubt. The breaker is divided into a triangle and open, box three shape in appearance.
02
Hydraulic vibratory pile hammer
vibro pile driving quipment is a relatively complex type of accessory product, and the production process level is required to be higher. Pile hammer can be used with various types of excavators, and is suitable for deep foundation pit projects with large areas, large barrel pile construction and large steel casing construction projects, soft foundation and rotary drilling rig construction projects, high-speed railway and foundation roadbed construction projects, municipal construction projects, pipeline construction, sewage interception and support and retaining projects, and is mainly used in flood control, dams, drainage pipes, earthwork, slopes of earth-preventing walls, etc. It can drive or pull piles of various materials and shapes, such as steel piles, cement piles, rail piles, iron plates, H-shaped plates, and drainage pipes.
03
Pulverizer
The hydraulic pulverizer for excavators are composed of a body, a hydraulic cylinder, a movable jaw and a fixed jaw. The external hydraulic system provides oil pressure to the hydraulic cylinder, so that the movable jaw and the fixed jaw of the hydraulic crushing tongs open and close to crush objects. The hydraulic crushing tongs for excavators are now widely used in the demolition industry. During the demolition process, they are installed on the excavator for use, so that only the excavator operator needs to operate them.
04
Double-cylinder hydraulic shears are made of high-strength wear-resistant plates. The two shear plates are equipped with synchronization devices to achieve synchronous opening and closing. The blades are made of high-toughness and high-strength steel, which can cut iron like mud. The hydraulic shears can rotate 360 degrees hydraulically to improve working capacity. The special speed-increasing valve design can increase the working speed and penetrate complex structures with huge shearing force. H and I-shaped steel structures can also be sheared and dismantled. This type of hydraulic shear has great use value in the scrap steel industry and greatly improves the shearing efficiency of scrap steel.
05
Eagle scrap shear
Scrap shears can be divided into three parts: the blade, the body, and the tailstock. The closed steel plate structure avoids reducing or eliminating bending and twisting on any side. It is often used for steel structure demolition, scrap steel processing, dismantling of vehicles such as cars, and widely used in scrap steel recycling. Scrap shears can cut iron materials, steel, cans, pipes, etc. The unique design and innovative method ensure efficient operation and strong cutting force.
06
Vibratory compactor
compactor plate is suitable for various terrains and various operation methods. It can complete the compaction of planes, slopes, steps, grooves and pits, pipe sides and other complex foundations and local tamping treatment. It can be used directly for piling, and can be used for pile driving and crushing after installing the clamp. It is mainly used for the compaction of highway and railway roadbeds such as bridge culvert backs, new and old road junctions, shoulders, slopes, embankment and slope compaction, civil building foundations, building trenches and backfill soil compaction, concrete pavement repair compaction, pipeline trenches and backfill compaction, pipe sides and wellhead compaction, etc.
07
Grabbers (wood grabbers, steel grabbers, screen grabbers, etc.)
This type of attachment can be divided into wood grabbers, steel grabbers, screen grabbers, brick grabbers, etc. according to different appearance structures. The basic design principle is the same and they are used in different occasions to grab objects, such as iron, vegetables, grass, wood, paper scraps, etc. The market application value is very high, it can effectively replace manual labor, and the work efficiency is very high.
08
Quick hitch couplers
Excavator quick hitch couplers are divided into: mechanical and hydraulic; mechanical quick hitch coupler can be used without modifying the excavator pipelines and hydraulic systems (low-cost type); hydraulic quick hitch couplers require modification of the excavator pipelines and hydraulic systems to achieve automatic replacement of working devices. Excavator quick connectors can greatly improve the performance of excavators. After assembling the quick connector, various special tools can be quickly connected: buckets, rippers, hydraulic breakers, grabs, loosening screens, hydraulic shears, drum screens, crushing buckets, etc.
09
Auger Drill
Excavator auger drill is applicable to most drilling projects such as construction piling drilling, photovoltaic power generation drilling, and tree planting drilling. Advantages: Drilling does not require soil cleaning, and one person can complete the work. After drilling to the depth, the drill rod is lifted, and the soil is attached to the spiral blades, and rarely falls back. After lifting, just turn the drill rod forward and backward to record the soil, and it will fall naturally. The auger drill can be operated by one person, and the hole can be completed as soon as the drill is completed, which greatly improves work efficiency. In the era of energy transformation, excavators, auger drills and pile drivers can be seen working together at photovoltaic construction sites across the country.
10
Screening bucket
A screening bucket is a specialized attachment for excavators or loaders used primarily to separate and sift materials of varying sizes such as soil, sand, gravel, construction debris and more.
If you have any demands or questions, please send message to wendy@jxhammer.com or whatsapp: +86 183 53581176
Post time: Jan-20-2025