Hydraulic Orange Peel Grapple
Product features
1. It adopts imported HARDOX400 sheet material, and is light in weight and excellent in wear resistance.
2. Among the same products, it has the largest grabbing force and widest grabbing distance.
3. It has built-in cylinder and high-pressure hose, and the oil circuit is completely closed, protecting the hose and prolonging the service life.
4. The cylinder is equipped with an anti-fouling ring, which can effectively prevent the tiny impurity in the hydraulic oil from damaging the seals.
Product Parameters
|
Model |
Unit |
GR04 |
GR06 |
GR08 |
GR10 |
GR14 |
|
Dead Weight |
kg |
550 |
1050 |
1750 |
2150 |
2500 |
|
Max Opening |
mm |
1575 |
1866 |
2178 |
2538 |
2572 |
|
Open Height |
mm |
900 |
1438 |
1496 |
1650 |
1940 |
|
Closed Diameter |
mm |
600 |
756 |
835 |
970 |
1060 |
|
Closed Height |
mm |
1150 |
1660 |
1892 |
2085 |
2350 |
|
Bucket Capacity |
M³ |
0.3 |
0.6 |
0.8 |
1 |
1.3 |
|
Max Load |
kg |
800 |
1600 |
2000 |
2600 |
3200 |
|
Flow Demand |
L/min |
50 |
90 |
180 |
220 |
280 |
|
Opening Times |
cpm |
15 |
16 |
15 |
16 |
18 |
|
Suitable Excavator |
t |
8-11 |
12-17 |
18-25 |
26-35 |
36-50 |
Four valve/sealing rate 50% can be customized according to customer requirements
Applications
Our product is suitable for excavators of various brands and we have established long-term and stable partnerships with some well-known brands.
About Juxiang
| Accessoryname | Warrantyperiod | Warranty Range | |
| Motor | 12 months | It is free to replace the cracked shell and broken output shaft within 12 months. If the oil leakage occurs for more than 3 months, it is not covered by the claim. You must purchase the oil seal by yourself. | |
| Eccentricironassembly | 12 months | The rolling element and the track stuck and corroded are not covered by the claim because the lubricating oil is not filled according to the specified time, the oil seal replacement time is exceeded, and the regular maintenance is poor. | |
| ShellAssembly | 12 months | Damages caused by non-compliance with operating practices,and breaks caused by reinforce without the consent of our company,are not within the scope of claims.If Steel plate cracks within 12 months,the company will change the breaking parts;If Weld bead cracks，please weld by yourself.If you are not capable to weld,the company could weld for free,but no other expenses. | |
| Bearing | 12 months | The damage caused by poor regular maintenance, wrong operation, failure to add or replace gear oil as required or is not within the scope of claim. | |
| CylinderAssembly | 12 months | If the cylinder barrel is cracked or the cylinder rod is broken, the new component will be replaced free of charge. The oil leakage occurring within 3 months is not within the scope of claims, and the oil seal must be purchased by yourself. | |
| Solenoid Valve/throttle /check valve /flood valve | 12 months | The coil short-circuited due to external impact and the incorrect positive and negative connection is not in the scope of claim. | |
| Wiring harness | 12 months | The short circuit caused by external force extrusion, tearing, burning and wrong wire connection is not within the scope of claim settlement. | |
| Pipeline | 6 months | Damage caused by improper maintenance, external force collision, and excessive adjustment of the relief valve is not within the scope of claims. | |
| Bolts, foot switches, handles, connecting rods, fixed teeth, movable teeth, and pin shafts are not covered by warranty. Damages to parts resulting from not using the company’s specified pipeline or not following the provided pipeline requirements are not included in claim coverage. | |||
Maintaining an orange peel grapple involves the following steps:
1. **Cleaning:** After each use, clean the grapple thoroughly to remove debris, materials, and any corrosive substances that may have adhered to it.
2. **Lubrication:** Regularly lubricate all moving parts, joints, and pivot points to prevent rust and ensure smooth operation. Choose appropriate lubricants recommended by the manufacturer.
3. **Inspection:** Routinely inspect the grapple for signs of wear, damage, or malfunction. Pay special attention to tines, hinges, cylinders, and hydraulic connections.
4. **Tine Replacement:** If the tines show significant wear or damage, replace them promptly to maintain effective grabbing performance.
5. **Hydraulic System Check:** Regularly examine the hydraulic hoses, fittings, and seals for any leaks or wear. Ensure the hydraulic system is working correctly and address issues immediately.
6. **Storage:** When not in use, store the grapple in a sheltered area to protect it from weather elements that could accelerate corrosion.
7. **Proper Usage:** Operate the grapple within its designated load capacity and usage limits. Avoid tasks that exceed its intended capabilities.
8. **Operator Training:** Ensure operators are trained in correct usage and maintenance practices to minimize unnecessary wear and tear.
9. **Scheduled Maintenance:** Adhere to the manufacturer’s recommended maintenance schedule. This might involve tasks like seal replacement, hydraulic fluid checks, and structural inspections.
10. **Professional Servicing:** If you notice significant problems or find it challenging to conduct routine maintenance, consider engaging qualified technicians for professional servicing.
By following these maintenance practices, you’ll prolong the lifespan of the orange peel grapple and ensure its safe and efficient operation over time.
